M-Line: Mobile high pressure washer


Product Description

The M-Line is a highly efficient, cost effective mobile high pressure washer by IWT. It is an ideal cleaning solution for bins, tanks and CIP, as well as a wide variety of processing equipment.

The M-Line combines high pressure and a low flow rate to minimize media consumption in cleaning. It features advanced technology and an innovative and light, ergonomic design, that is unparalleled with anything else on the market. The M-Line is a high performance cleaning solution thanks to the extraordinary mechanical action of the water supplied by a pump capable of generating up to 80 bar pressure at nozzle level combined with a water flow rate as low as 40 L/min (9 gal/min) for reduced water consumption.

The M-Line features an on-board printer that generates a comprehensive batch report at the end of each washing cycle. Up to two dosing units and detergent tanks are housed inside the unit together with a low level sensor and flow meter for the most accurate dosage of chemicals during the washing stage of the cycle. Upon completion of the cleaning cycles, the piping is flushed with filtered, compressed air to eliminate any residue of water and prevent any growth of microbiological contamination when the unit is not in use.

360° orbital spray pattern

Main Features and Benefits

  • cGMP and FDA compliant mobile high pressure washer
  • Suitable for a wide range of applications
  • Ideal for Clean In Place (CIP)
  • Built of AISI 316L stainless steel
  • Washing pressure range from 20 up to 80 bar
  • Reduced detergent and water consumption
  • Equipped with a hydrokinetic cleaning head
  • Wheel-mounted, ABS, anti-scratch casing
  • Ergonomic
  • Surfaces in contact with fluids built of AISI 316L stainless steel
  • User ID and log-in, password protected menus
  • A variety of alarms
  • Ability to store 30 different washing procedures
  • On-board printer
  • Cost effective solution to process a wide variety of bin sizes
  • Add-on drying module allows for a complete washing-drying process within the same cycle


  • Add-on drying and water tank modules
  • Water conductivity control
  • Chemical dosing system
  • Lid lifting column for bin processing
  • Mobile water tank featuring a heating system
  • Drying unit
  • Tank module combination


  • Hydrokinetic cleaning head
  • Unidirectional hand held jet gun
  • Lid for bin processing


Additional Product Model Imagery

M-Line manual lance

M-Line being moved

M-Line bin washing and drying station

M-Line control console

M-Line hydrokinetic head in action

M-Line water in/out connections

A thorough, unmatched spray pattern

Product details and downloads

Request further information on this product

Connect with STEQ America

© 2019 STEQ America LLC. All Rights Reserved. Privacy Policy | Sitemap | Site Credits.