Isolation Technology

Incubator System for Advanced Therapy Labs (FlexyCult)


Product Description

STEQ America is proud to present the FlexyCult™ Incubator System for Advanced Therapy Labs – the best solution to scale up your cell culturing procedures, manufactured by Comecer.

FlexyCult can be sterilized with VPHP at the beginning of your application process, together with the isolator or independently. It is then aseptically loaded with your cell culture through the isolator. There is no need for a water reservoir inside the incubation module because air and CO2 are prepared outside the incubator with the correct required moisture, and delivered ready. The operator at no stage comes in direct contact with the culture.

At present, there is no other solution like FlexyCult in the industry market. *Patent pending.

FlexyCult™ is a multiple single-batch incubation system connected to a shared utilities docking station

Do you need to expand your production capacity but are running out of space in your Grade B cleanroom? Do the long cleanroom turnover cleaning procedures cost you valuable time? Are you worried about the risks of keeping several incubators in the same area?
If you answered “yes” to any of these questions, then take a closer look at the FlexyCult incubator system.

A dedicated, specifically-designed solution for Grade A air/ CO2 circulation, coupled with a wall heating system, allows for perfect distribution of the temperature and CO2 inside the culturing environment.

A hydrogen peroxide sterilization system is available on board the docking station. The operator can select which of the incubators to sterilize with dedicated
cycles in order to ensure a Grade A environment during set up.

Continuously Monitored:
Centralized control of all the relevant parameters takes place through an embedded motherboard and supervisory system. Equipped with alarms to alert operators of any out-of-range parameters.

Several incubators can be present in the same environment without risk of possible cross-contamination, as no more than one incubator will be permitted to be opened at any given time, and there is no capability for external contact. The FlexyCult guarantees safety for operators and products, with maximum flexibility and a space-saving configuration.

Working in conjunction with Comecer’s cell culture isolator, opening and closing of the system only happens within a Grade A environment, and without any product exposure to the operator or surrounding environment.

Main Features and Benefits

  • Used in regenerative medicine
  • Used for cell therapies, incubation systems and asepsis
  • Available in sets of 3, 6 or 9 incubation modules to easily integrate into any footprint, flexibility or budgetary requirements
  • A unique solution unlike any other presently on the market
  • Enhances the way ATMPs are processed in your cell factory
  • No direct contact between operator and culture
  • Can be opened assuring Grade A continuity
  • Can be placed in a Grade D environment, as it is sealed and does not require any external intervention
  • Can be sterilized with VPHP at the beginning of the process, together with the isolator or independently
  • Air and CO2 is prepared outside the incubator and readily delivered
  • Incubation volume: 67 liters
  • Temperature range: 30-40 °C
  • Pressure: 100 Pa


  • Please speak with a STEQ America team member for more information


  • Please speak with a STEQ America team member for more information


Additional Product Model Imagery

FlexyCult incubation system with 9 modules

Incubator system undocked

Incubator system transport

Connect and use

System closing

System disconnect

Incubator system docked

Product details and downloads

Request further information on this product

Connect with STEQ America

© 2020 STEQ America LLC. All Rights Reserved. Privacy Policy | Sitemap | Site Credits.