Isolation Technology

Dispensing and Weighing Isolator


Product Description

STEQ America is proud to present the Comecer Dispensing and Weighing Isolator. This isolator was engineered and designed to permit the dispensing and weighing activities of micronized highly potent substances (progesterone OEL 0,01 mg/m3 ).

This compact isolator consists of two chambers – one pre-chamber to inlet material, and a second main chamber for performing dispensing activities. It is also equipped with a special CIP system consisting of spray balls, spray guns and a solvent mixing system. Drying In Place comes standard with independent heaters, and a humidity and temperature probe inside each chamber.

One 380mm diameter continuous liner port is featured on the side of each chamber to allow a large drum where product is stored to easily exit. In the main chamber, there is an integrated Hycoflex® system to take out the dispensed product.

The Eurotherm paperless recorder has been integrated into the dispensing and weighing isolator to conveniently record all your critical process data such as temperature, humidity and chamber pressure.

The Perfect Isolator for Weighing and Dispensing Operations

A compact isolator consisting of two chambers:

One pre-chamber: to inlet material
One main chamber: to perform and complete the dispensing process

Main Features and Benefits

  • Used in primary pharmaceutical production
  • Used for containment
  • Fully PLC controlled
  • GAMP 5 compliant software
  • Operator friendly user interface
  • Air classification: ISO 5 (B)
  • Inlet and outlet air filters type: HEPA H14
  • Sliding tray
  • Stainless steel sheet
  • Pass-through door for communicating with the adjoining chamber
  • 190 mm glove flanges with gloves
  • 270 mm glove flanges with gloves
  • Continuous film port Diam. 380 mm
  • rH+T sensor for temperature and humidity internal monitoring
  • Magnehelic Manometers for the internal pressure control
  • Inverter for ventilation fan speed control
  • Automatic valves for air flow interception
  • JUMO Manometers to monitor inlet and outlet filters obstruction
  • Power supply: 230V and 50/60Hz
  • International protection rating: IP 54
  • 6 bar minimum supply pressure rating (compressed air/nitrogen)
  • 12 L/min WFI


  • Please speak with a STEQ America team member for more information


  • Please speak with a STEQ America team member for more information


Additional Product Model Imagery

Dispensing and Weighing Isolator washing system

Dispensing and Weighing Isolator spray gun

Product details and downloads

Request further information on this product

Connect with STEQ America

© 2019 STEQ America LLC. All Rights Reserved. Privacy Policy | Sitemap | Site Credits.