Standard Incubator IN30


Product Description

Take a closer look at Memmert’s standard incubators, which are home everywhere in the world of research, medicine, pharmaceuticals and food analytics, as well as food chemistry.

In the laboratory, the IN30 is ideal for all applications with temperatures up to +80°C, specifically for incubating living cultures at +37 °C. Thanks to the finely-tuned control technology, critical temperature overshoots are completely ruled out, valuable loads are therefore warmed up particularly carefully in this highly precise microbiological incubator.

Choose from 8 model sizes (32 to 749 liters volume) and 2 model variants – SingleDISPLAY and TwinDISPLAY. We offer natural convection or forced air circulation, and double doors (interior glass, exterior stainless steel) for a clear view without a drop in temperature. Activate your sterilization routine via ControlCOCKPIT (TwinDISPLAY).

Experience an intuitive and easy-to-use operating menu and pre-heated fresh air to prevent temperature fluctuations.

Create complex ramp programs in minutes with AtmoCONTROL

Programming is performed via the AtmoCONTROL by means of the mouse or touchpad on your notebook. Even the most complex ramp programs are created within minutes. Touch, turn and go – perform the setup of your incubator in three simple steps. Beautiful and functional, the IN30 incubator is made of Memmert’s scratch resistant stainless steel which is also hygienic, robust, and ever-lasting.

Main Features and Benefits

  • Typical applications include microbiological tests, colony counts, virology and toxicology
  • Heating is optimally tuned for both natural convection and forced air circulation
  • Fan can be switched off entirely for sensitive samples or those that cannot be exposed to air turbulence
  • Valuable chamber loads for research, pharmaceutics, medicine and food chemistry are warmed up very carefully
  • Intuitive and easy-to-use operating menu
  • Unique, all-round surface heating geared to both natural convection and forced air circulation
  • Adjustment of pre-heated fresh air admixture by air flap control
  • Vent connection with restrictor flap
  • Interior dimensions (W x H x D): 400 x 320 x 250 mm
  • Exterior dimensions (W x H x D): 585 x 704 x 434 mm
  • Set temperature range of min. 5°C above ambient up to +80°C
  • Setting accuracy temperature of 0.1 °C
  • 1 Pt100 sensor DIN class A in 4-wire-circuit
  • ControlCOCKPIT SingleDISPLAY: Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
  • Digital timer with backward counter with target time setting capabilities (adjustable from 1 minute to 99 days)
  • Function SetpointWAIT: The process time does not start until the set temperature is reached
  • 3 freely selectable calibration temperature values
  • Adjustable parameters include:
    - Temperature (Celsius or Fahrenheit)
    - Air flap position
    ­- Program time
    ­- Time zones
    ­- Summertime or wintertime
  • Program stored in case of power failure
  • Adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
  • Auto diagnostic system for fault analysis
  • Fully insulated stainless steel door with 2-point locking (compression door lock)
  • 1 stainless steel electropolished grid
  • Works calibration certificate for +37°C
  • Inner glass door
  • Language settings for English, Spanish, German, French, Polish, Czech and Hungarian
  • CE and UL certified


  • 8 model sizes: 32 to 749 liters volume
  • 2 model variants: SingleDISPLAY or TwinDISPLAY
  • Voltage 115 V, 50/60 Hz (instead of 230 V, 50/60 Hz)
  • Available with an adjustable air fan to guarantee optimum air circulation in the incubator chamber
  • AtmoCONTROL software for reading out, managing and organizing the data logger via Ethernet interface
  • Interior lighting for observing the load
  • Contact us for a customized solution


  • Reinforced stainless steel grid, max. loading 60 kg, from size 450 with guide bars and fixing screws and only in connection with option K1
  • Perforated stainless steel shelf
  • Stainless steel slide-in drip try or bottom drip try (15 mm rim)
  • USB-Ethernet adapter
  • Ethernet connection cable 5 m for computer interface
  • Castor frame (2-part), height 140 mm
  • Wall bracket for mounting


Additional Product Model Imagery

Reinforced perforated stainless steel shelves

Sub-frame on castors

Castor frame

STEQ America works with Memmert's global network of service and support

Standard units are safety-approved and bear the test marks

Product details and downloads

Request further information on this product

Connect with STEQ America

© 2020 STEQ America LLC. All Rights Reserved. Privacy Policy | Sitemap | Site Credits.