Incubators

CO₂ Incubator ICO150

| PRODUCT MANUFACTURER: MEMMERT

Product Description

High-end functions for the protection of cell cultures, bacteria cultures or tissue cultures.

The control system of the Memmert CO2 incubator ICO is so finely tuned that the appliance reaches the setpoint temperature very quickly and without temperature overshoots. Alarm notifications to your mobile phone guarantee the safety of the chamber load, and the battery-buffered ControlCOCKPIT ensures continuous CO2 control even when there is a power failure.

Ideal hygiene is a given too: rounded edges enable easy and thorough cleaning.

Additionally integrated over-and under temperature protection "ASF", automatically follows the setpoint value at a preset tolerance range, alarm in case of over-or under temperature, the heating function is switched off in case of overtemperature, cooling function in case of under temperature.



Main Features and Benefits

  • Chamber volume of 156 liters
  • Temperature range 5 °C above ambient temperature up to +50 °C
  • Standard sterilization program: 60 minutes at 180°C (without removing the sensors)
  • Setting accuracy temperature: 0.1 °C
  • 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
  • Humidity limitation thanks to a Peltier element; when water dish is full and inserted, the Peltier element limits the value of relative humidity in the interior to 93 % rh +/- 2.5 %
  • Digital electronic CO2 control with dual beam NDIR system, with auto-diagnostic system and acoustic fault indication, barometric pressure compensation
  • TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays>
  • AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port
  • Integral fault diagnostics for temperature and CO2
  • Visual and acoustic alarms
  • Large-area multi-function heating system on four sides with additional door and back heating to avoid condensation
  • Membrane filter (in order to remove impurities and pollutants, all incoming gases pass through a membrane filter before they reach the chamber)
  • Fully insulated stainless steel door with 2-point locking (compression door lock)

Request further information on this product

    Additional Product Model Imagery

    Potential-free contact (24V/2A) with socket 3 pin, according to NAMUR NE 28 for external monitoring (set point of temperature and CO2 is reached)

    Stacking set (4 pcs) for stacking of appliances of same size

    Standard units are safety-approved and bear the test marks

    Connect with STEQ America

    © 2022 STEQ America LLC. All Rights Reserved. Privacy Policy | Sitemap | Site Credits.