Incubators

CO₂ Incubator ICO105med

| PRODUCT MANUFACTURER: MEMMERT

Product Description

Take a closer look at Memmert’s CO2 incubators specially designed for cell cultivation and in-vitro fertilization. Their precision and reliability make them a necessity in your laboratory.

Typical applications include microbiological tests, colony counts, virology, and toxicology. Exemplary special applications include the cultivation of cells or tissue, in-vitro fertilization, and gene expression. For cultivation above and below room temperature and alternate stability testing, see our ICP, IPP and IPS range.

The control system of the Memmert CO2 incubator ICOmed is engineered so that the appliance reaches the set point temperature quickly and without temperature overshoots. The interior can be sterilized within 60 minutes at 180°C. Alarm notifications to your mobile phone guarantee the safety of your chamber load and can be added to your incubator as an additional feature.

Experience the battery-buffered ControlCOCKPIT which ensures continuous CO2 control even when there is a power failure. Rounded edges enable easy and thorough cleaning.



Create complex ramp programs in minutes with AtmoCONTROL

Programming is performed via the AtmoCONTROL by means of the mouse or touchpad on your notebook. Even the most complex ramp programs are created within minutes. Touch, turn and go – perform the setup of your incubator in three simple steps. Beautiful and functional, the ICO105med CO2 incubator is made of Memmert’s scratch resistant stainless steel which is also hygienic, robust, and ever-lasting.

Main Features and Benefits

  • Temperature range up to +50°C
  • Failsafe, FDA-compliant logging of temperature, CO2, O2 humidity, and open door time data
  • Visual and acoustic alarm as well as alarm notification to a mobile phone if the individually adjustable temperature, CO@, O2, or humidity ranges are exceeded
  • Active humidity control
  • Interior chamber, including all installations and sensors, can be sterilized at +180 °C in a 60-minute program
  • User-friendly, intuitive operating concept
  • Inner chamber and housing made of high-quality, corrosion-resistant stainless steel
  • Precise and homogenous temperature control thanks to a product-specific heating concept
  • A wide range of options for programming and documentation using interfaces and integrated data loggers
  • Active humidity control ensures short recovery times after the door has been opened and minimizes vaporization in the interior
  • Interior is heated from all six sides and the heated inner glass door offers maximum protection for cell and tissue cultures
  • Turbulence-free chamber ventilation ensures a constant and uniform atmosphere
  • The shutter box can be opened allowing easy access to the controls
  • USB and Ethernet connections, as well as data logger with a ten-year storage capacity
  • Data can be read and programs can be uploaded by remote access
  • 2 gas connections with quick release connectors for automatic switch-over of gas bottles
  • Control of oxygen concentration by introducing nitrogen, adjustment range from 1% to 20% O2

Options

  • 4 model sizes
  • Chamber volume of 56 to 241 liters
  • Voltage 115 V, 50/60 Hz (versus the standard 230 V, 50/60 Hz)
  • Door hinged on the left
  • Battery-buffered ControlCOCKPIT which ensures continuous CO2 control even when there is a power failure
  • AtmoCONTROL software for reading out, managing and organizing the data logger via Ethernet interface
  • Electropolished seamlessly welded chamber
  • Electronic control for active humidification and dehumidification (40 to 97% rh)
  • Contact us for a customized solution

Accessories

  • IVF module for ICO105med: patented, consisting of 8 slide-in units, a total of 16 special racks with indentations for 16 Petri dishes (60 mm diam.)
  • HEPA-filter for chamber (filter class E11) according to EN 1822, packed in a sterile condition, incl. fixing unit
  • Additional water dish
  • IQ/OQ documentation with device-specific works test data
  • Ethernet connection cable 5 m for computer interface
  • Additional perforated stainless steel shelf
  • CO2 pressure reducing valve DIN 8546, incl. Gas cylinder monitor
  • USB Ethernet adapter

Video

Additional Product Model Imagery

Potential-free contact (24V/2A) with socket 3 pin, according to NAMUR NE 28 for external monitoring (set point of temperature and CO2 is reached)

Stacking set (4 pcs) for stacking of appliances of same size

Optional IQ/OQ documentation with device-specific works test data

Standard units are safety-approved and bear the test marks

Product details and downloads

Request further information on this product

Connect with STEQ America

© 2019 STEQ America LLC. All Rights Reserved. Privacy Policy | Sitemap | Site Credits.